Lesson 6 · 10 min
Imbalances and stacked imbalances
You’ll learn
- How a diagonal imbalance is calculated
- What a stacked imbalance is
- Why imbalances sometimes fail
6.1 The diagonal rule
An imbalance is a price where one side traded far more than the other. The correct comparison is diagonal, not across the same row. This is because the ask at a price is matched against the bid one tick below it: when buyers lift the offer at P, the bid they stepped over sits at P - 1 tick.
| Type | Compare | Typical setting |
|---|---|---|
| Ask (buy) imbalance at price P | Ask volume at P versus bid volume at P - 1 tick | Ask at least 3x the bid (300%) |
| Bid (sell) imbalance at price P | Bid volume at P versus ask volume at P + 1 tick | Bid at least 3x the ask (300%) |
The 3x (300%) setting is a common default in software, not a rule. Some traders use 2x or 4x, and many add a minimum size so tiny numbers do not count. It is a setting to experiment with.
Why diagonal? When a buyer lifts the offer at P, the best bid at that moment is one tick lower. The imbalance test asks: did buyers at P overwhelm the sellers who had been waiting one tick below? Comparing the bid and ask on the same row would mix two different groups of people, since the bid at P was never in the way of buyers who paid P.
6.2 A worked example
Four consecutive rows all flag as ask imbalances. This is called a stacked imbalance: several adjacent price levels where the same side dominated. Many traders define 'stacked' as three or more in a row.
The bar's delta is +256. Aggressive buying was strong at every price from 5,011.25 to 5,012.00. It is a picture of one-sided aggression, and some traders watch stacked areas as potential reference zones to revisit later.
To check the 'stacked' rows by hand, start at the bottom flagged row and work upward. Each row uses its own ask and the bid one row below it: 100 against 30, then 90 against 28, then 66 against 22, then 70 against 15. All four ratios are at least 3, so the stack runs four rows tall. The bottom row, 5,011.00, has ask 45 against bid 50 below it, so it does not flag, and the stack stops there.
6.3 When imbalances do not mean much
A single imbalance, like the one below, is common and often meaningless. On quiet, thin rows the ratio test is easy to pass with small numbers.
Stacked imbalances can also fail. Aggression can be followed by price giving back the whole move. They are a description of what happened in one bar. Whether price revisits, respects or ignores that area is something you can only find by watching, which is why this is practice material and not a forecast.
A good habit is to log the stacked imbalances you notice and watch whether price later returned to them. In some cases it will pause there, in some it will run straight through. Keep honest counts of both. If you only remember the cases that worked, your records will tell a nicer story than the market does.
- Imbalances are diagonal: ask at P versus bid at P - 1 tick.
- A common default is 3x, but it is only a setting.
- A stacked imbalance is several adjacent rows with the same side dominant.
- Isolated imbalances are common and low in meaning; always combine with location and risk.
Quick check
Pass with 2 of 3 to complete the lesson (+20 XP, plus 5 XP per correct answer the first time).
1.Which comparison defines an ask imbalance at price P?
2.What is a stacked imbalance?
3.Is the 3x (300%) ratio a fixed rule?