Lesson 5 · 10 min
Absorption vs exhaustion
You’ll learn
- What absorption looks like in a footprint
- What exhaustion looks like and why it is different
- How to tell which one you may be looking at
5.1 Two ideas that are often mixed up
Traders often use the words absorption and exhaustion as if they meant the same thing. They do not. They describe two different volume patterns.
| Absorption | Exhaustion | |
|---|---|---|
| Volume at the extreme | Heavy | Drying up (thin) |
| Price progress | Little or none despite the volume | Price reaches a new extreme on little volume |
| Picture | A wall: lots of orders hit it, it does not move | The push runs out of fuel |
These two ideas are often mixed up because both can appear at the same kind of place: a prior high, a prior low or a value area edge from Supplement 1. The difference is in the volume, not the location. Training your eye to ask 'heavy or thin?' first prevents most of the confusion.
5.2 Absorption: heavy volume, no progress
Absorption means a large amount of aggressive volume trades at a price, but price does not move through it. For absorption to happen, passive orders on the other side must be big enough to soak up the aggression.
Here sellers were aggressive: delta is -190 on the bar, and 340 contracts traded at the bid on the lowest row. Yet price stopped at 4,998.00. That is consistent with passive buying absorbing the selling at that price. We cannot know who the buyer was, only that price did not progress.
What would show the absorption has failed? If price trades below 4,998.00 and keeps going, the passive buyers have either stopped or been overwhelmed. A trader who studies this pattern should therefore note a level where the idea is wrong in advance, for example a few ticks beyond the absorbed low. If you do not know where you are wrong, you do not have an idea; you have a hope.
5.3 Exhaustion: volume drying up at the extreme
Exhaustion looks different. Price pushes to a new high or low, but the volume at the very tip is thin. Buyers (or sellers) have stopped showing up, so the move ends on a 'thin tip' with little trading behind it.
Notice that the top two rows hold only 4 + 3 and 6 + 8 contracts, compared with 55 + 140 = 195 at 5,005.00. The thin tip is a warning that few participants wanted to trade at those higher prices. It does not say price must reverse; only that the move may be losing support.
A related caution: a thin tip can also just be the end of a quiet bar. Thin volume is only informative when it happens after an obvious push, near a level you already care about, and at a time of day when volume is normally decent. A thin tip at lunchtime tells you much less than the same tip near the open.
5.4 Telling them apart
Ask two questions. First, how much volume is at the extreme? Heavy suggests absorption; thin suggests exhaustion. Second, did price make progress? Absorption has none despite the effort; exhaustion has some, ending on a poke. Both are descriptions of what has happened. Neither tells you what the next bar will do, so each still needs a defined risk if you decide to act.
The table in section 5.1 can be copied into your notes as a quick checklist. When you review a day, tag each candidate bar as absorption, exhaustion or neither. Neither is a perfectly good answer, and most bars will be neither. Counting how often a pattern appears, and what price did next, is how you learn its real value for your own style.
- Absorption = heavy volume with no price progress.
- Exhaustion = volume drying up at the extreme, a thin tip.
- Neither identifies who traded or predicts what comes next.
- Watch what price does after the pattern, and define risk first.
Quick check
Pass with 2 of 3 to complete the lesson (+20 XP, plus 5 XP per correct answer the first time).
1.Which pattern is heavy volume with no price progress?
2.What does exhaustion look like at a new high?
3.Which wording is most appropriate for absorption?